Bubbler Jet Fountain Nozzle

Bubbler Jet

Bubbler Jet Fountain Nozzle

Bubbler jet creates a solid, foamy and bulky water mound at lower heights which becomes scattered but still massive, highly aerated and visible at greater spray heights. This kind of nozzles are placed underwater and the water effect depends on surface ripples in addition to how deep the nozzle is installed.

The theory behind Bubbler is taking in air by the snorkel(s), mixing it with water flowing inside the nozzle, pressurizing and directing the mixture upwards which is then enriched by the water above the nozzle, resulting in the unique “bubbler effect” – a wider cascade effect.

Bubbler jets are made entirely of stainless steel AISI 304 (or 316 on request).

Visibility: | Wind Resistance: | Sound Level: | Splash:

  • Foamy & Bulky Water Mound
  • Very Rich Air & Water Mixture
  • Highly Visible & Wind Resistant
  • Heavy Duty Machined Construction
  • Made of Stainless Steel AISI 304
    Available in 316
  • Water Level Dependent Nozzle
  • Water supply to the jet must be linear, non-turbulent
  • Highly efficient nozzle due to the Stainless Steel frictionless inside surface
  • 4″ Bubbler is also available (MP 400)

Pure Stainless Steel

The Fontana Bubbler Jet is made entirely of AISI 304 Stainless Steel (or 316 on request). This makes it practically invulnerable to corrosion, tarnishing, impacts and any kind of deterioration. It also makes it significantly more energy efficient than competitive bronze ones due to the frictionless inside surface.

Do you want to learn more about Stainless Steel and why it is necessary in modern fountains? The Stainless Steel Research

State-of-the-Art Production

We ‘ve made major investments in a state-of-the-art production line to deliver even better fountain equipment, even faster.

Accurate Flow Data

A series of comprehensive tests on each nozzle means not only industry-leading Quality Control (ISO 9001 certified) but accurate flow measurements as well.

Technical Specifications

Bubbler Specs

MP 150
Single Snorkel
MP 200
Single Snorkel
MP 300
Double Snorkel
Material Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Inlet BSP/NPT 1½″ 2″ 3″
Nozzle’s Orifice (D) 41 mm 53 mm 81 mm
Dimensions
A | B | C | E | F
190 | 365 | 56 | 125 | 135 210 | 430 | 69 | 75 | 180 355 | 527 | 104 | 75 | 242
Integrated Swivel Ball Joint Optional Optional Optional
Suction Strainer Openings Required 5.0 mm 6.0 mm 8.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
0.5 m 127 | 2.0
1.0 m 165 | 3.3 237 | 2.7 474 | 3.3
1.5 m 195 | 4.5 280 | 3.7 560 | 4.6
2.0 m 221 | 5.6 316 | 4.6 634 | 5.9
2.5 m 242 | 6.7 356 | 5.8 678 | 6.8
3.0 m 266 | 8.2 386 | 6.8 741 | 8.1
4.0 m 293 | 10.2 439 | 8.9 866 | 11.1
5.0 m 307 | 12.2 477 | 11.0 1016 | 13.5
6.0 m 502 | 13.1 1153 | 16.2
8.0 m 1426 | 21.8
10.0 m 1700 | 27.7
12.0 m 1973 | 33.8
14.0 m 2247 | 40.2

For 316 Stainless Steel add suffix .316